Huawei SUN2000-33KTL-US User Manual page 71

SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Procedure
Step 1 Prepare positive and negative connectors.
Use the positive and negative metal contacts and DC connectors supplied with the SUN2000.
Using other models of positive and negative metal contacts and DC connectors may result in
serious consequences. The caused device damage is not covered under any warranty or
service agreement.





Figure 5-27 Crimping tool (H4TC0003)
(1) Locator
Issue 07 (2019-06-20)
After crimping the positive and negative metal contacts, pull the DC input power cables
back to ensure that they are connected securely.
Insert the crimped metal contacts of the positive and negative power cables into the
appropriate positive and negative connectors. Then pull back the DC input power cables to
ensure that they are connected securely.
The Amphenol Helios H4 metal contacts supplied with the DC connectors are either cold
forming contacts or stamping forming contacts. Choose the crimping tools that fit the
metal contact types. Do not mix up the tools.
Crimp the Amphenol Helios H4 metal cold forming contacts using crimping tool
UTXTC0005 (Amphenol, recommended) or H4TC0001 (Amphenol).
Crimp the Amphenol Helios H4 metal stamping forming contacts using crimping tool
H4TC0003 (Amphenol, recommended), H4TC0002 (Amphenol), PV-CZM-22100
(Staubli), or PV-CZM-19100 (Staubli). When choosing PV-CZM-22100 or
PV-CZM-19100, do not use the locator. Otherwise, metal contacts would be damaged.
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
64