Huawei SUN2000-33KTL-US User Manual page 97

SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 6-4 Selecting a connection mode
Step 5 Tap the user name area to switch between the common user, advanced user, and special user.
Issue 07 (2019-06-20)

When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-WLAN
module SN, and the initial password is Changeme.

Use the initial password upon first power-on and change it immediately after login. To ensure
account security, change the password periodically and keep the new password in mind. Not
changing the initial password may cause password disclosure. A password left unchanged for a long
period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In these
cases, the user is liable for any loss caused to the PV plant.

After you select Use by default for this USB accessory, the message will not appear if you connect
the app to the inverter again without removing the USB data cable.
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
90