Table of Contents
Advertisement
SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 4-9 Lifting the SUN2000
Step 2 Lift the SUN2000 from the packing case and move it to the installation position with the help
of multiple persons.
----End
4.5 Installing the Mounting Bracket
The mounting bracket is supplied with the SUN2000 or separately.
The mounting bracket has four groups of tapped holes, each group containing four tapped
holes. Mark any hole in each group based on site requirements and mark four holes in total.
Two round holes are preferred.
Figure 4-10 Mounting bracket dimensions
Before installing the mounting bracket, check whether there is a security torx wrench on the
mounting bracket.
Issue 07 (2019-06-20)
If yes, remove the security torx wrench from the mounting bracket and save it for later
use.
Figure 4-11
shows the position for storing the security torx wrench.
If no, obtain a security torx wrench from the SUN2000 fitting bag.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
28
Advertisement
Table of Contents
