SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Step 4 Bind communications cables after connecting them.
Figure 5-49 Binding communications cables
Step 5 Connect the conduit and fittings of the pipe.
----End
Follow-up Procedure
Check that the cables are connected correctly and securely. Then take appropriate measures to
ensure that the pipe conduit and fittings are secured reliably, and seal the cable holes. Clear
foreign matter from the maintenance compartment.
5.6.4 Connecting the RS485 Communications Cable in a Common
Way
Connecting Cables to the Terminal Block
Step 1 Route the communications cables through the waterproof connectors.
Issue 07 (2019-06-20)
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
79