SUN2000-(33KTL, 36KTL, 40KTL)-US
User Manual
Figure 5-25 Connecting the AC output power cable (including the ground cable and neutral wire)
Step 5 Tighten the waterproof connector to a torque of 7.5 N•m.
----End
Follow-up Procedure
Check that the cables are connected correctly and securely. Then seal the waterproof
connectors and cable holes, and clear foreign matter from the maintenance compartment.
5.5 Connecting DC Input Power Cables
Prerequisites
Issue 07 (2019-06-20)
The cable colors in figures are for reference only. Select appropriate cables according to the local
standards.
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
61