Table of Contents
Advertisement
User's Manual
5. MENU
You can set various parameters of the instrument, to utilize memory etc by means of MENU.
5.1. Utilization and structure of MENU
5.1.1. How to enter MENU and to move in MENU
Step 1
Press the MENU key.
•
Use ▲ and ▼ keys to select item (function) you need. Confirm with the ENTER key.
•
Use ▲ and ▼ keys to select parameter you need in submenu.
•
Set the parameter you selected. The way of setting will be described later.
•
Step 2
Press the ESC key and release it (repeatedly) until you abandon all (sub)menus. The
•
number of ESC key press/release repetition depends on how „deep" you are in MENU.
Once the function is set it remains in instrument's memory even if it is disconnected
from mains.
5.1.2. The MENU structure
Items of submenus are indented.
Last values
Ident. number
Class
RPE200mA
U∆10A (RPE10A)
Riso 500 V
I equivalent
I PE
I PE inv.
I differential
I diff.inv.
Device power (Device current)
Memory
ID: (identification number of equipment)
Set-up
I external
Timer RPE 10A
Erase memory
Nominal voltage
PE cross-section
Change PIN
Thermometer
RPM
Copyright © 2004 ILLKO, s.r.o.
47
ESC 2051
Advertisement
Table of Contents
