MG ZS Series Manual page 225

Table of Contents

Advertisement

warning and a visual warning will be available during
the intervention.
Speed assistance system setting
The operating interface for the speed assistance system
is located in the infotainment display. Enter the vehicle
setting interface to locate the driving assist option, scroll
across the page to find the setting interface for the speed
assistance system:
1 The speed limit information function defaults to
be enable after the vehicle power system is set to
ON/READY. Press the UP/DOWN/LEFT/RIGHT
button in the RH steering wheel multifunction switch
pack to select the current speed option in the trip
computer. Under this interface, long pressing the
OK button to turn on/off the speed limit information
function.
Touch the corresponding button on the
infotainment display to activate/inactivate visual
warning. The function defaults to the last selected
state from when the vehicle power system was
ON/READY.
STARTING & DRIVING
2 Touch the corresponding button on the infotainment
display to select the speed assist mode: manual speed
assist and intelligent speed assist.
Speed settings of manual speed assist:
After the manual speed assist function is enabled, the speed
limit value can be set by using the adaptive cruise control
lever as follows:
1 With the manual speed assist function enabled, the
initial speed limit value is displayed as "—" on the
instrument pack. Move the adaptive cruise control
lever up and down (1 and 2 in the figure below) to
adjust the target speed limit value. Moving the lever
up or down once will increase or decrease the target
speed by 5mph (5km/h). Holding the lever up or down,
the speed limit value will continuously change in units
of 5mph (5km/h). Press the SET button (3 in the
figure below), the manual speed assist function will be
activated. If the set speed limit value is lower than the
current actual speed, the speed limit value displayed
on the instrument pack will be defined by the current
actual speed. Otherwise, the set speed limit value will
be displayed.
4
209

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents