MG ZS Series Manual page 38

INSTRUMENTS AND CONTROLS
Speed Warning
Allows the setting of the over-speed alarm threshold,
please note, the over-speed alarm function is turned off
when "OFF" is displayed.
ESC OFF
Allows the setting of the Stability Control System to On
or Off.
Next Service
Displays and facilitates the reset of the current vehicle
maintenance information.
Active Safety
Displays the active safety information of the vehicle.
Warning Information
Displays any current warning, failure messages or
important prompts.
22
Warning Message
Warning messages and prompts are displayed in the
information centre in the instrument pack.
communications are displayed in 'pop up' messages, these
can be divided into the following categories:
• Operating Instruction
• System State Instruction
• System Malfunction Alert
Please follow the instructions displayed in the 'pop up'
message or in the case of a warning message, please refer
to the relevant section of the owners manual to follow the
correct instructions.
The following are a selection of warning messages that may
appear in the information centre.
Any