Bulb Replacement - MG ZS Series Manual

EMERGENCY INFORMATION

Bulb Replacement

Before replacing any bulb, turn off the lighting switch to
avoid any possibility of a short circuit.
Note: Only replace bulbs with the same type and
specification.
Take care NOT to touch the glass with your fingers; always
use a cloth to handle the bulb. If necessary, clean the glass
with methylated spirits to remove fingerprints.
If in doubt, when replacing bulbs, contact an MG
Authorised Repairer.
For other bulbs not listed and to be replaced, ask an MG
Authorised Repairer for help.
264
High/Low Beam Headlamp Bulb Renewal
1 Open the bonnet——see
"Maintenance" section.
2 Disconnect the battery negative terminal.
3 Identify and locate the headlamp bulb cover plug（1）.
Rotate the cover anti-clockwise and remove the cover
plug.
4 Rotate the bulb anti-clockwise and remove.
5 Remove the wiring connector from the bulb.
6 Refit the wiring connector to the new bulb.
"Bonnet" in the