MG ZS Series Manual page 193

from the brake pedal when the vehicle is stationary and the
Auto Hold active.
Auto hold has 3 main states:
1 Off: Function in Off state.
2 Standby: Function in Standby state. The function is
active but the vehicle has not stopped. Once the
vehicle has stopped, and all other conditions are met,
the system will automatically select Park.
3 Parking: Function in Parked state. In this state the
green indicator on the instrument pack illuminates.
STARTING & DRIVING
With the driver's seat belt fastened, the door closed and
the power system operating, press the auto hold switch to
switch the auto hold function from Off to Standby state.
With the brake pedal firmly pressed and the vehicle
completely stopped, the auto hold function will switch
from the Standby state to the Parking state.
4
177