Switching The Power System Off - MG ZS Series Manual

STARTING & DRIVING
2 Ensure P or N is selected, press the brake pedal and
then press START STOP to power the vehicle.
If the vehicle power system cannot be changed after the
car has left the area of strong radio interference or had
the smart key battery replaced please consult an MG
Authorised Repairer.
IMPORTANT
The Alternative Starting Procedure should only be
required if the smart key battery is very low or flat.
Once the vehicle has been removed from the area of
excessive radio interference the keyless entry and Start
Stop systems should return to normal.

Switching the Power System OFF

Setting the power system to OFF.
1 After bringing the car to a halt, ALWAYS maintain
brake pedal application.
2 Using the electronic shift control knob select (P), this
will automatically apply the parking brake - please
check that the parking brake is applied.
138
3 Press START STOP button to shut down the power
system.
Note: Please observe the park brake warning light
and message displayed in the instrument pack
message centre confirming that the parking brake
is applied before exiting the vehicle.
Note: Should the power system require to be shut
down in the case of an emergency, press and hold
the START STOP button in excess of 4 seconds.