MG ZS Series Manual page 292

EMERGENCY INFORMATION
Interior Lamp Bulb Renewal
1 Disconnect the battery negative terminal.
2 Use a suitable tool or small flat bladed screwdriver to
gently prise front end of the lens, and remove the lens.
3 Pull the bulb from its mounting to remove.
4 Install new bulb.
5 Install the lens, locate the two prongs at the front
of the lens and then carefully flex the lens to locate
the two prongs at the rear of the lens into the lamp
276
assembly. Push the lens upwards until it 'clicks' into
position
6 Connect battery negative terminal.
7 Test lamp operation.