Transport Assembly Top Cover Installation; Transport Assembly Cleaning - JCM GLOBAL RDM-100 Series Integration Manual

Transport Assembly Top Cover Installation

When installing the Transport Assembly Top Cover, the shaft will slide into the cutout easily without
excessive force.
Figure 39 Cutout Location
T A
RANSPORT SSEMBLY
Open the Transport Assembly Cover and clean each Sensor and Roller on the Transport Path.
Figure 40 Transport Assembly Sensor/Roller Locations
BNF Stop
Sensor 2
Caution: When cleaning is performed by removing the Transport Assembly Top Cover, take care not to damage the
Unit. Refer to "BNF Stop Sensor 1, 2 Cleaning" on page 19.
P/N 960-000186R_Rev. A {EDP #253995}
RDM-100™ Series Retail Deposit Module
Figure 39 Cutout Location
C
LEANING
BAU
Front
Positioning
Sensor
Figure 40 Transport Assembly Sensor/Roller Locations
Be sure the Shaft is
installed into the
Cutouts on both sides
correctly. 
If the Shaft is not
installed correctly, the
Unit could become
damaged.
© 2016, JAPAN CASH MACHINE CO., LTD.
2 0
Cutout
Pinch
Roller
Transport
Roller