Safety; Safety Notices; Safety Instructions - Markusson Sensomatic Original Instruction Manual

Table of Contents

Advertisement

Sensomatic

2 Safety

2 .1 Safety notices

This section contains safety information for the Sensomatic
CAUTIONS and IMPORTANT notes that are applicable for the safe operation of the machine .
WARNING
A warning tells you about conditions that can cause injury or death, if you do not obey the
instructions . Do not continue until all conditions are accepted and engaged .
CAUTION
A caution tells you about conditions that can cause damage to equipment, if you do not obey the
instructions . Do not continue until all conditions are accepted and engaged .
IMPORTANT Important or noteworthy information that enables trouble-free and optimal use of the machine .

2 .2 Safety instructions

WARNING Before you
in this manual . Obey the instructions in this manual to prevent injuries or damage to the equipment .
WARNING Put the machine indoors, in a dry area with good light and a flat and level floor . Do not let the
machine become wet or moist . Do not put the machine near gas, liquids or other materials that can catch fire or
explode .
WARNING Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust, or near flammable materials . Machines create sparks which may ignite such materials .
WARNING The user must only do maintenance that is described in this manual on the machine . Only approved
and trained service technicians can do service on the machine .
WARNING Make sure that the power is turned off before you install, operate or do maintenance on the machine .
WARNING To prevent mistakes when chains are sharpened, it is very important to understand how the grinding
machine works . Read the instructions carefully before the machine is used .
WARNING Use protective glasses – risk of sparks from the machine when grinding .
WARNING Use ear protection – risk of hearing damage .
WARNING Use safety gloves – risk of cuts from the grinding disc or chain .
WARNING Be careful around moving parts – risk of squeezing .
WARNING Stop the machine immediately if it does not work correctly!
WARNING Before a chain is sharpened, make sure that the the grinding disc is not cracked, does not vibrate
or wobble . If the grinding disc is damaged it must be replaced immediately, see chapter 6 .3 . "Change the grinding
disc and fit the grinding disc guard" . If abnormal vibrations occur during operation, immediately stop the machine and
check the condition of the grinding disc .
WARNING Attach air hoses and cables with cable clamps, to make sure no one trips over them .
WARNING The Sensomatic machine must always be safely attached to the stand . Attach the stand to the floor .
CAUTION Only use accessories that are supplied or approved by the manufacturer .
CAUTION If the pitch is not correctly set the chain will be pushed into an
may result in a damaged chain .
CAUTION If the metal of a cutting link turns blue during grinding, the speed is set too high and the metal is
overheated . This can cause the metal in the cutting tooth to lose its properties . Replace the damaged cutting link or
sharpen the chain again .
CAUTION Clean the machine daily . To prevent that it breaks, remove grinding dust every day . Use a vacuum
cleaner, brush or similar to clean the machine .
install, operate or do maintenance on the machine, you must read the safety information
Auto Chain Grinder . This manual
incorrect sharpening position . This
Sensomatic 201902 EN 5
Safety
contains WARNINGS,

Advertisement

Table of Contents
loading

Table of Contents