Operate The Machine - Markusson Sensomatic Original Instruction Manual

Operation

5 .3 Operate the machine

WARNING Always wear safety gloves,
protective glasses, ear protection, and any other
personal protective equipment suitable for the
current work task .
WARNING Stop the machine immediately if it
does not work correctly!
Note: For a video demonstration of how to install
and operate the machine, go to Markusson .se .
Note: Discard the chain when the longest part of the
cutting tooth is shorter than 4 mm, or if you find
cracks or burrs in the chain .
1 . Use the first, second and third digit buttons to
set the counter to the number of teeth that still
need to be sharpened on the chain .
See section 3 .6 .1, "Counter" for more
information about how to set the counter .
Note: Do not use the 3in1 grinding mode when
grinding a brand new chain, e .g . during the first
cycle .
2 . Set the sensor switch to ON .
32 Sensomatic 201902 EN
4 mm
3 . Set the 3in1 switch to:
• ON to use the 3in1 grinding mode where all
3 edges (the cutter, the gullet and the depth
gauge) on the cutting links are sharpened .
The edges are sharpened, one after the other,
without interaction from the user .
• OFF to use the regular grinding mode where
only the cutters are sharpened .
4 . Set the grinding wheel switch to ON to start
grinding motor .
5 . Set the chain pusher switch to ON to start the
feeding of the chain and the movement of the
grinding head . The sharpening will start after
this .
Sensomatic