Assemble The Pneumatic Chain Tensioner - Markusson Sensomatic Original Instruction Manual

Sensomatic
1 . Start by placing the base piece on the floor .
Place the front piece on top of the base piece
by aligning the holes they have on the front
right and left corners . Bolt the front piece to the
base through the two holes using the provided
wrench .
G
2 . Next, attach the two side pieces to each other
with provided bolts through the holes at the
intersection of two pieces to create the side
support piece .
J
G
3 . To complete the assembly of the stand, bolt the
side support first to the base and then to the
front piece .
G
4 .5 Assemble the pneumatic
chain tensioner
To assemble the pneumatic chain tensioner, lay the
stand on the floor with the front piece facing up .
1 . First, attach the handle to the pneumatic chain
tensioner .
Sensomatic 201902 EN 17
Installation