Maintenance And Service; Safety During Maintenance; Frequency Of Maintenance - Markusson Sensomatic Original Instruction Manual

Sensomatic

6 Maintenance and Service

6 .1 Safety during maintenance

WARNING Make sure that the power is turned off before you install, operate or perform maintenance on the
machine .
WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual . Obey the instructions in this manual to prevent injuries or damage to the equipment .
WARNING Always wear safety gloves, protective glasses, and any other personal protective equipment
suitable for the current work task .
WARNING The user must only do maintenance that is described in this manual on the machine . Only approved
and trained service technicians can do service on the machine .

6 .2 Frequency of maintenance

Maintenance Step
Cleaning
Change grinding wheels .
Center the grinding wheel .
Check and adjust the wire .
Adjust the chain lock .
When
Daily
When worn or damaged .
When worn or if the chain has a
different width than the previous .
Once every 3 months, depending on
usage .
When the chain is loose during
operation .
Maintenance and Service
Description
Clean the machine daily to remove grinding
dust . Use a vacuum cleaner or brush to clean
the machine .
See section 6 .3, "Change the grinding wheel
and fit the grinding wheel guard" .
See section 5 .2 .10, "Center the grinding disc" .
See section 6 .6, "Check and adjust the wire" .
See section 6 .5, "Adjust the chain lock" .
Sensomatic 201902 EN 35