Set The Chain Pusher - Markusson Sensomatic Original Instruction Manual

Operation
5 . Move the tensioner downward until the chain is
tightly secured in its position . There should be a
gap of about 10–15 mm between the
pneumatic-piston nut and pneumatic piston,
where the piston should be visible .
6 . Tighten the locking handle to secure the chain .
7 . Gently press the chain with your hand to test
the tension . The chain should not slacken .
26 Sensomatic 201902 EN
8 . If the chain tension is too loose, repeat the
procedure .
Note: You can also order a telescopic chain
extension kit if you need to fit longer chains . See
section 8, "Accessories and Spare Parts" .

5 .2 .6 Set the chain pusher

1 . Press the power button to turn on the machine .
2 . Set the sensor switch to ON .
Sensomatic