Maintenance And Service; Safety During Maintenance; Frequency Of Maintenance - Markusson Grindomatic V12 Original Instruction Manual

Maintenance and Service

6 Maintenance and Service

6.1 Safety during maintenance

WARNING Make sure that the power is turned off before you install, operate or do maintenance on the
machine.
WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual. Obey the instructions in this manual to prevent injuries or damage to the equipment.
WARNING Always wear safety gloves, protective glasses, and any other personal protective equipment
suitable for the current work task.
WARNING The user must only do maintenance that is described in this manual on the machine. Only approved
and trained service technicians can do service on the machine.

6.2 Frequency of maintenance

Maintenance Step
Cleaning
Change grinding wheels.
Center the grinding wheel.
Check and adjust the wire.
Fasten the chain vise.
26 Grindomatic 201708 EN
When
Daily
When worn or damaged.
When worn or if the chain has a
different width than the previous.
Once every 3 months, depending on
usage.
When the chain is loose during
operation.
Description
Clean the machine daily to remove grinding
dust. Use a vacuum cleaner or brush to clean
the machine.
See section 6.3, "Changing the grinding
wheel and fitting the grinding wheel guard".
See step 14 of section 5.2.5, "Making the
grinding settings".
See section 6.5, "Checking and adjusting
the wire".
See section 6.4, "Fastening the chain vise".
Grindomatic