Installation; Safety During Installation; Site Requirements; Unpacking The Machine - Markusson Grindomatic V12 Original Instruction Manual

Grindomatic

4 Installation

4.1 Safety during installation

WARNING Before you install, operate or do maintenance on the machine, you must read the safety information
in this manual. Obey the instructions in this manual to prevent injuries or damage to the equipment.
WARNING Always wear safety gloves, protective glasses, and any other personal protective equipment
suitable for the current work task.

4.2 Site requirements

WARNING Put the machine indoors, in a dry area with good light. Do not let the machine become wet or moist.
Do not put the machine near gas, liquids or other materials that can catch fire or explode.
CAUTION Make sure that the floor where the machine is placed, is flat and
the floor with screws.
Note: Machines can be set up on a bench or you can use the optional stand. Please note that mounting hardware for
the bench is not supplied with the machine.

4.3 Unpacking the machine

Note: For a video demonstration of how to unpack, assemble, install, and operate the machine, visit markusson.se.
1. Unpack the crates.
Note: Keep the delivery crates and packing materials. Pack the machine in them if it is moved or sent for service.
The crates and packing materials will minimize the risk of damage during transportation.
2. Make sure that all parts in the list below are included in the delivery:
• Grindomatic Auto Chain Grinder machine
• Grindomatic Auto Chain Grinder User manual (this document)
• rectangular profile stone (55 x 15 x 15 mm) and profile template
• hex key, which is used to change the top-plate angle
• Allen wrench, which is used for tightening
• grinding wheel guard (with 2 screws for assembly)
• 2 types of ceramic grinding wheels
• stop clamp
• battery cable (black and red power cable with battery clamps)
Note: For your convenience, you may also use your own tools to assist the machine's assembly.
3. Remove all packing materials. Remove the metal plate from the chain vise, which is used to protect the grinding
head during transport. Remove the air hose connector's packing material.
Installation
level. If it is not, attach the stand to
Grindomatic 201708 EN 13