Correct Use; Device Type; Type Of Use; For Use In Potentially Explosive Areas - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2019
2

CORRECT USE

2.1

DEVICE TYPE

Automatic powder gun for the automatic coating of grounded workpieces.
2.2

TYPE OF USE

The automatic PEA-C4 HiCoat gun serves as stationary equipment for industrial electrostatic
coating with ignitable powder in automatic systems. It can be operated either with single
control units or switch cabinet modules.
WAGNER explicitly prohibits any other use!
The automatic powder gun may only be operated in a temperature range from 5–40 °C;
41–104 °F.
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

This type A-P electrostatic powder gun is suitable for processing industrial powder lacquers
for coating electrically conductive objects and can be used in potentially explosive areas
(zone 22) (see Explosion Protection Identification, Chapter 3.1).
In explosion hazard areas, only use approved explosion-proof electrical devices.
2.4

PROCESSIBLE WORKING MATERIALS

– types of powder that can be charged electrostatically;
– metallic powder.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter application
problems.
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
liquid coating products, e.g., solvents or water-based lacquers are not processed;
no food, medicine or cosmetics are processed.
ORDER NUMBER DOC390829
PEA-C4-HiCoat
9