Replacing The Protective Wedge; Removing The Protective Wedge - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2019
8.5

REPLACING THE PROTECTIVE WEDGE

8.5.1 REMOVING THE PROTECTIVE WEDGE

Note:
A wedge tool is available to prevent the protective wedge from being damaged when
dismantling and inserting.
You will find the necessary spare parts and wearing parts in Chapter
manual.
1 Protective wedge (when positioned)
2 Electrode holder (shown with a cut-away
view to improve comprehension)
3 Wedge tool
Procedure:
1. Guide wedge tool 3 into electrode holder 2
up to stop.
2. Pull protective wedge 1 out of electrode
holder 2 using wedge tool 3.
3. Press protective wedge 1 sideways out of
wedge tool 3 manually (without tool).
ORDER NUMBER DOC390829
1
P_03908
2
2
PEA-C4-HiCoat
13 of this operating
3
2
3
1
3
1
P_03909
P_03910
34