VERSION 05/2019
8.4
REMOVING THE FLAT JET NOZZLE
Procedure:
1. Unscrew union nut 1 from gun housing 4.
2. Pull flat jet nozzle 2 off electrode holder 3.
3. Carefully pull electrode holder 3 out of the gun housing 4.
Note:
Do not damage the electrode holder 3, when pulling it out and
inserting it.
4. Remove powder residues from the removed parts and from the
automatic gun.
Note:
Never place the automatic gun or parts of the automatic gun in
cleaning agent.
As a rule, the protective wedge needs to be checked for wear and
replaced if necessary.
It is recommended to replace the protective wedge.
ORDER NUMBER DOC390829
New protective wedge
Worn protective wedge
PEA-C4-HiCoat
3
2
1
P_03907
P_00592
P_00593
4
33