VERSION 05/2019
Procedure:
1. Unscrew union nut 1 from gun housing 4.
2. Pull flat jet nozzle 2 off electrode holder 3.
3. Carefully pull electrode holder 3 out of the gun housing 4.
Note:
Do not damage the electrode holder 3, when pulling it
out and inserting it.
4. Remove powder residues from the removed parts and
from the automatic gun.
8.7.2 FITTING THE ANGLE ADAPTER
Procedure:
1. Install electrode holder 3 together with nozzle 2
in nozzle insert 4 and tighten union nut 1.
2. Push angle adapter 5 onto the gun body and
gently screw threaded sleeve 6.
3. Swivel angle adapter 5 into the desired position
and then tighten threaded sleeve 6 well.
ORDER NUMBER DOC390829
PEA-C4-HiCoat
3
2
1
P_03907
6
5
4
6
5
4
1
2
3
P_03915
38