Replacing The Automatic Gun - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2019
8.3

REPLACING THE AUTOMATIC GUN

Before replacing the automatic gun, any powder residue must be thoroughly removed.
The wearing parts in the automatic gun, marked in the spare parts list with " ", must be
regularly checked and replaced as necessary.
5
P_03906
Procedure:
1. Switch off the powder coating system and/or the high voltage generation.
2. Disconnect the electrical cable 1 from the automatic gun 5.
3. Disconnect powder feed hose 2 and atomizing air hose 6 from the automatic gun 5.
4. Disconnect automatic gun 5 from the mounting bracket 4 by loosening the
locking nuts 3.
5. Insert the new automatic gun 5 into the mounting bracket 4 and fasten it with
locking nuts 3.
4. Connect powder feed hose 2 and atomizing air hose 6 to the automatic gun 5.
5. Connect electrical cable 1 to the automatic gun 5.
7. The automatic gun is ready for use again.
ORDER NUMBER DOC390829
1
6
PEA-C4-HiCoat
2
3
4
32