Fabric Guide - Xerox 2510 Service Manual

REP 8.4 Fabric Guide Replacement
1. (Figure 2): lnstall the retaining rod and the
I
Parts List on (2510) PL 8.2 (251 5) PL 8.4
CAUTION
weight bar into the fabric guide.
m
STEP 1 A : The coloredstrip on the fabric guide
2. The remainder of the replacement i s the
Removal
is closer to the edge with the corner cut. The
reverse of the removal procedure.
corner cut must be positioned toward the back
1. WARNING: Disconnect power cord. o f the copier to avoid damage to the fabric
guide and possible media jams. Install the
2. (Figure 1): Remove the fabric guide.
retaining rod on the side opposit the corner cut.
SLOT
I O W N
REMOVED
A
INSTALL THE
RETAINING
ROD B
INSTALL T H E
COLORED STRIP
Figure 2.
Install the Retaining Rod and the Weight
Bar into the Fabric Guide
7192
REP 8.4
4-1
o
251 01251 5