Of 6 Medial Will Not Feed Problem - Xerox 2510 Service Manual

I
OF 6 Media
Will
Not Feed
Problem
Media will not move into the Media Transport.
Cause Corrective Action
Media Feed Clutch is not functioning correctly. Refer to the
E
-
Paper Path Jam RAP.
Upper Feed Roll stub shaft is slipping in the Replace the Upper Media Feed Roll
(PL 8.1)
Drive Shaft. Make a mark across both shafts,
and make a copy. If the the mark no longer
lines up, the shaft
is
slipping
Obstruction in the Turnaround Baffle. Check the area for pieces of media or other
material that may cause the media to jam.
8/96
OF Media Will Not Feed
2-82
25101251 5