Corotron Wires - Xerox 2510 Service Manual

REP 9.10 Corotron Wires
WARNING
NOTE: STEP 0: The plastic wire retainers are
Switch off the main power switch
only on the power supply end,
(251 0 W/Tag 23; 251 5)
and disconnect power cord.
1, Romove corotron nssembly,
2. (I:lyure 1): Prepare lo remove llre
corotron wires,
Removal
NOTE: STEP B: The wrapping has to removed
3. (Figure
2): Remove the corotron wires.
4
from the transferldetack corotron
NOTE: This procedure applies to both the only.
chargelprecharge and the
transferldetack corotrons. the
transferldetack corotron is shown.
REMOVE PLASTIC
WIRE RETI'
'-'---
STRING SHIELD
Flgure 1. Prepare 10 Remove Corotron
Wire
Figure
2.
Remove the Corotron Wires
(ContlnuodJ
7/92
2510/2515 4-27
REP 9.10