System Setup; Ground-Stacking - L-Acoustics WST K2 Rigging Manual

K2 WST enclosure
®
RIGGING MANUAL
VERSION 1.0

4 SYSTEM SETUP

4.1

Ground-stacking

Final check
After the setup, always verify no yellow labels are visible on the front and on both sides of the array.
K2_RM_EN_1.0
K2 enclosures on K1-SB
 Stack as many K1-SB enclosures as necessary.
Refer to the K1 rigging manual to set up the K1-SB part of the array.
 Position and attach a K2-BUMP on the K1-SB stack
Refer to PROCEDURE H.
 Position and attach an upside down K2 on the K2-BUMP and add as many K2
enclosures on top of the first one.
Refer to PROCEDURE C.
w w w . l - a c o u s t i c s . c o m 1 4 / 52