L-Acoustics WST K2 Rigging Manual page 11

Standard: One K2-BAR attached in the center of K2-BUMP Alternative: Two K2-BAR attached on the sides
The K2 system can be flown under a K1 system element, K1, K1-SB or K1-BUMP. The K2-LINK is designed to make
the rigging systems compatible.
It provides three holes and therefore three angles between the top K2 enclosure and the bottom K1 element: 0.25°,
2.5° and 5°.
w w w . l - a c o u s t i c s . c o m 1 1 / 52
K2_RM_EN_0.5