Elements For Storage And Transportation - L-Acoustics WST K2 Rigging Manual

3.2

Elements for storage and transportation

The K2-CHARIOT is designed for the transportation and storage of blocks of four K2 enclosures.
During transportation the blocks must have an inter-enclosure angle of 10° to avoid any separation of the enclosures.
This angle must be set using the enclosure rear rigging arm pin. The automatic locking system must remain unloaded.
The K2-CHARIOT rear rigging arm must be at its -15° site angle position.
TIPPING HAZARD
If the enclosures are not pinned at 10°, they can separate at the back, causing the stack to tip over.
K2_RM_EN_0.5
w w w . l - a c o u s t i c s . c o m 9 / 52