L-Acoustics WST K2 Rigging Manual page 18

K2 WST enclosure
®
RIGGING MANUAL
VERSION 1.0
2. Attach the other K2 enclosures on top of each other until the block of four is complete.
While holding the handle, rotate the front
rigging arm and secure it with both LINK pins.
Position a K2 enclosure on the first one.
Slide the rear rigging arm and secure it with
both pins, in the LINK and 10° holes.
Keep holding the enclosure in position with the
handles until the front rigging arm is secured.
3. Make sure the automatic locking system button is unloaded .
If the button has been pressed, pull to disengage the latch
w w w . l - a c o u s t i c s . c o m 1 8 / 52
K2_RM_EN_1.0