System Components - L-Acoustics K2/SB28 User Manual

System components

System components
Loudspeaker enclosures
K2 3-way full-range active WST enclosure
K1-SB K1-SB system subwoofer 2 x15"
SB28 high power subwoofer 2×18"
Powering and driving system
LA4X / LA8 amplified controller with DSP, preset library and networking capabilities
LA-RAK touring rack containing three LA8, for power, audio and network distribution
L-Case protection case for L-Acoustics 2U electronics
Refer to the LA4X / LA8 user manual for operating instructions.
Loudspeaker cables
SP cables 4-point speakON loudspeaker cables (4 mm² gauge)
SP cables come in four sizes: SP.7 (0.7 m/2.3 ft), SP5 (5 m/16.4 ft), SP10 (10 m/32.8 ft) and
SP25 (25 m/82 ft)
SP-Y1 breakout cable for two passive enclosures (2.5 mm² gauge) provided with a CC4FP adapter
4-point speakON to 2 × 2-point speakON
DO cables 8-point PA-COM loudspeaker cables (4 mm² gauge)
DO cables come in three sizes: DO.7 (0.7 m/2.3 ft), DO10 (10 m/32.8 ft) and DO25
(25 m/82 ft)
DOSUB-LA8 breakout cable for four passive enclosures (4 mm² gauge)
8-point PA-COM to 4 × 2-point speakON
speakON to PA- cable for one 3-way active enclosure
COM interface
2 x 4-point speakON to 8-point PA-COM
This cable is not provided and needs to be custom made.
Information about the connection of the enclosures to the LA amplifiers is given in this
document.
Refer to the LA4X / LA8 user manual for detailed instructions about the whole cabling scheme, including
modulation cables and network.
Rigging elements
Rigging elements or procedures are not presented in this document.
Refer to the K2 rigging manual.
Software applications
Soundvision 3D acoustical and mechanical modeling software
LA Network software for remote control and monitoring of amplified controllers
Manager
Refer to the LA Network Manager video tutorial.
Refer to the Soundvision help.
K2/SB28 user manual (EN) version 4.0 6