L-Acoustics WST K2 Rigging Manual page 33

3. Attach the K2-LINK interfaces to the K1/K1-SB.
Turn the wheels inside the dolly.
Pull back the bottom enclosures while
On both sides, attach a K2-LINK at the back of the K1-SB enclosure.
lowering the array until only the front wheel
touches the ground
.
Do not pin K2-LINK on K2.
w w w . l - a c o u s t i c s . c o m 3 3 / 52
K2_RM_EN_0.5