Procedure I. Stacking La-Rak On K2-Bump - L-Acoustics WST K2 Rigging Manual

PROCEDURE I. Stacking LA-RAK on K2-BUMP
Tools
Electric screwdriver with torque selector.
6 mm hex bit.
Wrench with 13 mm hex socket.
1. Remove the nuts and bolts from
the K2-RACKMOUNT rails.
Use the wrench with a 13 mm hex socket and the electric screwdriver. Set the torque to 5 N.m.
Before securing the side rails, make sure the frame pins are on the outside.
K2_RM_EN_0.5
2. Position and secure as many rails as necessary on the K2-BUMP.
3. Secure the rails on the K2-BUMP.
w w w . l - a c o u s t i c s . c o m
1 LA-RAK
2 LA-RAK
3 7 / 52