L-Acoustics WST K2 Rigging Manual page 21

2. Secure the K2 enclosure on the K2-BUMP.
Secure the front and rear rigging arm to the K2-BUMP.
The rigging arms should rest of the K2-BUMP spacers. Slide the front rigging arm up and down to align the holes.
Secure the front rigging arm to the K2 enclosure.
Raise the enclosure to align the holes.
Push the locking system button to unblock the lock.
3. Prepare the K2 block top enclosure
Adjust the inter-enclosure angle with the rear rigging arm.
Remove the lower front and rear pins.
w w w . l - a c o u s t i c s . c o m 2 1 / 52
K2_RM_EN_0.5