Roller Transport; Adjusting The Squareness Of The Racks - Kodak X-Omat 270 RA PROCESSOR Service Manual

SERVICE MANUAL
Section 2: ROLLER TRANSPORT

Adjusting the Squareness of the RACKS

SIDE
PLATE
2 SIDEPLATES
H150_0138ACA
H150_0138AA
8
DETECTOR
CROSSOVER
FIXER/WASH CROSSOVER
GUIDE
SHOE
H104_0139AA
DEVELOPER/FIXER or
film
travel
[1] Place the RACK on a smooth, flat surface.
[2] Check whether the SIDEPLATES of the RACK
touch the flat surface evenly. If they do not touch
evenly, apply pressure to the assembly.
See the figure at the left for where to apply
pressure to the DEVELOPER and FIXER
RACKS. See the figure below for where to apply
pressure to the WASH RACK.
H104_0137BCB
H104_0137BA
May 1996 – SM3058-3