Removing A Solid State Relay - Kodak X-Omat 270 RA PROCESSOR Service Manual

Removing a SOLID STATE RELAY

ESD
Possible damage from electrostatic discharge.
SCREW (2)
SPACER (2)
SCREW (4)
SOLID
STATE
MOV
RELAY
[1] De-energize the PROCESSOR.
[2] Record the 4 wire positions on the SOLID STATE RELAY that you want to remove.
[3] Apply THERMAL GREASE TL-2324 under the new SOLID STATE RELAY. Use a thin application, but
cover the area under the SOLID STATE RELAY completely.
[4] Install a new METAL OXIDE VARISTOR (MOV) onto the new SOLID STATE RELAY.
SM3058-3 – May 1996
RELAY
COVER
MOUNTING
SCREW (2)
COVER
Electrical
ELECTRICAL
BOX
H104_0591HCA
H104_0591HA
21