Adjusting the Tension on the DRIVE CHAIN
DRIVE
CHAIN
COVER
DRIVE CHAIN
MOTOR
BRACKET
SPROCKET
SCREW (3)
WASHER (3)
LOCK WASHER (3)
SM3058-3 – May 1996
[1] De-energize the PROCESSOR.
[2] Remove the DRIVE CHAIN COVER.
[3] Loosen the 4 DRIVE MOTOR BOLTS from the
[4] Press down on the DRIVE MOTOR to tighten the
[5] Tighten the 4 DRIVE MOTOR BOLTS.
DRIVE
MOTOR
DRIVE MOTOR
BOLT (4)
H104_0593CCA
H104_0593CA
MOTOR BRACKET.
DRIVE CHAIN. Allow 5 mm (
of the DRIVE CHAIN at the center of the DRIVE
CHAIN.
MAIN DRIVE
⁄
1
in.) deflection
4
11