78
Seats, restraints
3. Push the latch plate into the
buckle until it clicks. Position the
release button on the buckle so
that the safety belt could be
quickly unbuckled if necessary.
4. Pull the shoulder belt all the way
out of the retractor to set the lock.
When the retractor lock is set, the
belt can be tightened but not
pulled out of the retractor.
5. To tighten the belt, push down on
the child restraint, pull the shoul‐
der portion of the belt to tighten
the lap portion of the belt, and feed
the shoulder belt back into the re‐
tractor. When installing a forward-
facing child restraint, it may be
helpful to use your knee to push
down on the child restraint as you
tighten the belt.
Try to pull the belt out of the re‐
tractor to make sure the retractor
is locked. If the retractor is not
locked, repeat Steps 4 and 5.