Automatic Light Control
Automatic Light Control
Function
When the automatic light control func‐
tion is switched on and the engine is
running, the system switches be‐
tween daytime running lamps and
headlamps depending on the lighting
conditions.
Daytime Running Lamps
Daytime running lamps increase visi‐
bility of the vehicle during daylight.
Taillamps are not on.
Automatic Headlight Activation
Under poor lighting conditions, the
headlamps are switched on.
Tunnel Detection
When entering a tunnel, the head‐
lamps switch on immediately.
Adaptive forward lighting 3 129.
Headlamp High/Low-
Beam Changer
To switch from low to high beam,
push lever.
Lighting
To switch to low beam, push lever
again or pull.
Flash-to-Pass
To activate flash-to-pass, pull lever.
Adaptive Forward Lighting
(AFL)
Dynamic Curve Lighting
The headlamp beam pivots based on
steering wheel angle and speed, im‐
proving lighting in curves.
129