Effects; Static Mode; Manual Mode - ProLights ECLIPSEHDTWC User Manual

3. 17 EFFECTS

The unit has preset preset effects.
• Press the button MENU so many times until the display shows STAND ALONE, then select throught the
buttons UP/DOWN EFFECTS, then press the button ENTER.
• Set the desired effect and value Effect 1, Effect 2, Effect 3, Effect 4, Effect 5 using the UP / DOWN buttons, then
press the ENTER button.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3. 18 STATIC MODE

This fixture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the fixture.
• Press the button MENU so many times until the display shows STAND ALONE, then select throught the
buttons UP/DOWN STATIC, then press the button ENTER.
• Select Color Temperature through the buttons UP/DOWN, then press the button ENTER.
• Set the colors 2800K, 3000K, 3200K, 3400K, 3600K, ...... 9200K, 9400K, 9600K, 9800K, 10000K, through the buttons
UP/DOWN, then press the button ENTER.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3. 19 MANUAL MODE

To set the customized balance of red, orange, green, royal blue, blue and lime colors, refer to the following
procedure:
• Press the button MENU so many times until the display shows STAND ALONE, then select throught the
buttons UP/DOWN STATIC, then press the button ENTER.
• Select MANUAL COLOR MIXER through the buttons UP/DOWN, then press the button ENTER.
• Select the color Red, Orange, Green, Royal Blue, Blue, Lime through the buttons UP/DOWN, then press the
button ENTER.
• Using UP/DOWN button, select the desired color value 000 - 255.
• Press ENTER button to continue to the next color Red, Orange, Green, Royal Blue, Blue, Lime.
• Continue until the desired mix is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
ECLIPSEHDTWC
13