Maste/Slave; Effects; Static - ProLights ECLFRJPTU-DY User Manual

and press the ENTER button to display it.
- Fixture Time - Through the Fixture Time function you can display the operating time of the projector.
- Software Version - Through Version function you can display the currently installed software version.
- UID - This option shows the RDM identification number.
• Press the MENU button repeatedly to exit the menu and to save the changes made.
3.12 MASTER SLAVE
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Master/Slave and press ENTER to confirm
your choice.
• Press the UP/DOWN button to select the mode of operation:
- Master, if the unit is connected in series with other units and it acts as the Master;
- Slave, if the unit is not connected to other units.
• Press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.13 EFFECTS

The unit has pre-programmed effects that can be set through the following procedure:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Effects icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to select the mode of operation: Effects 1, Effects 2, Effects 3, Effects 4.
• Press the ENTER button to confirm your choice.
• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.14 STATIC

• The unit allows you to create configurations that can be set through the following procedure:
• To enter to static static mode, Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Static and press ENTER to confirm your
choice.
• Throught the UP/DOWN buttons select DIMMER o STROBE and press the ENTER button to confirm the
desired function.
• Set the value (000 - 255), Throught the UP/DOWN buttons, then press the ENTER button to confirm
• Press the MENU button repeatedly to exit the menu and to save the changes made.
ECLFRJPTU - DY
15