Effects; Static - ProLights MINIECLFRTU-DY User Manual

• Press the rotary knob to confirm your choice.
• Rotate knob and press on ← to go back or to meet the waiting time to exit the setup menu.

3.12 EFFECTS

The unit has pre-programmed effects that can be set through the following procedure:
• Press the rotary knob to access the main menu.
• Rotate knob button to scroll the menu, select Effects, then press the rotary knob to enter the next menu.
• Rotate knob button to select the mode of operation: Effects 1, Effects 2, Effects 3, Effects 4.
• Press the rotary knob to confirm your choice.
• Rotate knob and press on ← to go back or to meet the waiting time to exit the setup menu.

3.13 STATIC

The unit allows you to create configurations that can be set through the following procedure:
• To enter to static static mode, press the rotary knob to access the main menu.
• Rotate knob button to scroll the menu, select Stand Alone, then press the rotary knob to enter the next
menu.
• Rotate knob button to scroll through the menu, select Static and press rotary knob to confirm your
choice.
• Throught the rotary knob select Dimmer o Strobe and press the rotary knob to confirm the desired func-
tion.
• Set the value (000 - 255), Throught the rotary knob, then press it to confirm
• Rotate knob and press on ← to go back or to meet the waiting time to exit the setup menu.
NOTE: once the plug of the power cord has been connected to a power outlet, to access the Dimmer mode
directly, simply press the knob twice consecutively. After that, choiche the desired value.
NOTE: once the projector is connected to a power outlet, to directly access the Dimmer mode, simply dou-
ble click on the knob, rotating it. After that, choiche the desired value.
MINIECLFRTU - DY
11