Back Light; Flip Display; Key Lock; Dimmer Mode - ProLights ECLIPSEHDTWC User Manual

3. 7 BACK LIGHT

To adjust the time of the backlight display, press the button MENU so many times until shows ADVANCED,
press the button ENTER on SCREEN and select throught the buttons UP/DOWN BACK LIGHT, and press the
button ENTER to confirm.
• Press the button UP/DOWN to select (ON - 10S - 20S - 30S).
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3. 8 FLIP DISPLAY

To rotate the display by 180 °, press the button MENU so many times until shows ADVANCED, press the
button ENTER on SCREEN and select throught the buttons UP/DOWN FLIP DISPLAY, and press the button EN-
TER to confirm.
• Press the button UP/DOWN to select (No - Yes).
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3. 9 KEY LOCK

To lock the control panel buttos to avoid, for example, manomissions of settings. If this function is acti-
vated, the buttons are locked automatically. To deactivate the button lock function, press the buttons in
the following order to get access to menu commands: UP, DOWN, UP, DOWN, ENTER, ENTER. Press the
MENU button repeatedly so many times until shows ADVANCED, press ENTER on SCREEN and select throught
the buttons UP/DOWN BACK LIGHT, then press ENTER to confirm.
• Press the button UP/DOWN to select (No - Yes).
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3. 10 DIMMER MODE

To Enter in Dimmer mode and choose and simulate specific dimming curve, press the button MENU so
many times until shows ADVANCED, then select throught the buttons UP/DOWN DIM MODE, and press the
button ENTER to confirm.
• Press the button UP/DOWN to select (OFF - DIM1 - DIM2 - DIM3).
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.

3. 11 WHITE BALANCE

Press the button MENU then press the button UP/DOWN so many times until show WHITE CALIBRATION. Press
the button ENTER to confirm.
• Select the color Red, Orange, Green, Royal Blue, Blue, Lime through the buttons UP/DOWN. Press the button
ENTER to confirm.
• Set the value (125 - 255), using the buttons UP/DOWN.
• Continue until the desired setting is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
ECLIPSEHDTWC
11