Technical Specifications; Behind The Design - Kauai Labs navX-MXP User Manual

Overview

Technical Specifications

The navX-MXP circuit board and official firmware provide inertial and magnetic measurements,
with a range, accuracy and update rate as described on this page.
Note that certain performance specifications are only valid after a start-up
Gyroscope/Accelerometer Calibration
must be held still.
Additional details can be found in the
Electrical Specifications
Voltage:
Current Consumption:
Communications Interface:
Power Connector:
USB Connector:
navX-MXP is mentioned several times (pages 214-217, 227 and 231) within
30 Profiles of Design, Manufacturing and Control"
Team 624's 2015 Robot
Technical Specifications
period, during which time the navX-MXP circuit board
navX-MXP datasheet.
5V DC
50 millamps
USB, TTL UART, SPI, I2C
USB and/or 5VDC/GND Pins on MXP
Connector
USB Mini-B

"Behind the Design"

(2015, USFIRST).
"FIRST Robots – Behind the Design –
3