Kauai Labs navX-MXP User Manual page 31

Installation
Creating an Enclosure
navX-MXP circuit board. Note that the design file scale is 1000X actual size, so will need
to be scaled down by a factor of 1000 before printing.
navx-mxp-roborio-lid_v4_scaleddown.stl: STL Format File for 3d printing the lid-style
enclosure for the navX-MXP circuit board. This file contents have been scaled to their
actual size.
Printing and Customizing the Enclosure
The Sketchup (.skp) files can be edited using . Then, the files can be exported to a STL format
using the Sketchup STL Import/Export extension. Finally, these exported STL format files can
be opened and 3d-printed using .
Securing the Enclosure
The Lid Enclosure can be secured to the RoboRIO by two #4-40 3/8? screws. This will secure
not only the Lid, but will also secure the navX-MXP circuit board.
28