Installation; Roborio Installation - Kauai Labs navX-MXP User Manual

Installation

Installation
Plug-n-play: navX-MXP is designed for rapid,
National Instruments
a FIRST FRC Robot. navX-MXP and supports
FTC Robot.
Orientation: Tips and tricks for ensuring navX-MXP measurements are aligned with your robot,
including the new Omnimount
I/O Expansion: In addition to sophisticated motion processing, navX-MXP also provides
and digital I/O expansion
Flexibility: To allow flexible customization, navX-MXP also supports several
installation options as well as several communication options, providing flexibility
when integrating with other components.
Enclosure: To protect an installed navX-MXP, an
purchased, or printed on a 3D printer using open-source design files.
navX-MXP is designed for plug-n-play installation onto the National Instruments RoboRIO™.
This installation takes about only a minute. To install, simply place the 34-pin "MXP" Connector
on the bottom of the navX-MXP circuit board into the corresponding MXP slot on the top of the
RoboRIO, as shown below.
Installation
Installation
RoboRIO™, making it easy to install and integrate onto robots including
flexible mounting feature.
on a RoboRIO.

RoboRIO Installation

plug-n-play installation on a
plug-n-play installation onto an Android-based
enclosure is available – which can be either
analog
alternative
9