ICP DAS USA iCAM-760D User Manual page 47

The Video quality setting for stream #
Mode:
Frame Size:
Maximum Frame Rate:
Steaming Mode:
Quality/Bitrate:
Intra frame period (GOP):
Text Overlay:
iCAM-760D User's Manual
Two modes of encoding options are offered; "H264" and
"MJPEG".
3840x1920 resolution is set.
11, 12, 13, 14 & 15 frames per second (FPS).
Two choices of streaming modes are offered; "CBR
(CVBR)", "CBR (VQCB)" and "VBR (variable bit rate)".
Where the CBR includes:
 CVBR:
If the provided bit rate is not exceeded, the video is encoded
with provided quality factor. If it exceeds, the video quality
will be varied to meet the provided bit rate while the frame
rate is kept constant.
 VQCB:
The video quality and the frame rate will be variable to meet
the provided bit rate.
The options for streaming mode quality are expressed
differently between VBR (showing Quality) and CBR
(showing Bitrate):

Quality Standard, Good, & Detailed
:

Bitrate 64K bps, 128K bps, 184K bps, 200K bps, 256K bps, 384K
:
bps, 512K bps, 768K bps, 1M bps, 1.5M bps, 2M bps, 3M
bps, 4M bps, 5M bps, 6M bps, 8M bps and 10M bps.
25, 30, 40, 50 & 60 frames per period. This function will let
you choose how long distance between two I-Frames.
Lager value means longer distance between two I-Frames and
this selection is suitable for the stable Network Bandwidth
Environment; so we suggest the smaller value selection is
proper to the worse Network Bandwidth Environment.
When enabled, each streamed frame will be overlaid with the
Camera ID (text field, Chinese word isn't support) and
stamped with date/time (if enabled) as illustrated below.
ICP DAS
items on this pane are as follows:
Available rate options are; 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
Available choices are; 1, 2, 3, 4, 5, 6, 8, 10, 15, 20,
Chapter 4
Setup  47