4.4.3 Snapshot Tab
The Snapshot tabbed pane sets the Camera to take snapshot images when event
is triggered.
The Snapshot event trigger methods:
1. Always
2. Schedule
3. Motion
4. GPIO Input
The settings about the Snapshot event triggered
1. Time Lapse: scheduled time and capture interval
2. Number: single snapshot or 6 snapshots
3. Target: defining the video record file target destination.
Always:
iCAM-760D User's Manual
Under this method, the Camera automatically continuous to capture
snapshots of the area under surveillance at every 1, 2 or 3 seconds
interval.
Time Lapse: Snapshot is triggered at every 1, 2 or 3 seconds intervals.
Target: The stream of accumulated snapshots may be stored in the SD
Card, Remote Disk, sent to host by E-mail, FTP as preferred or
through all of them.
ICP DAS
Chapter 4
Setup 76